Instruction
Heat press Application Instructions for Rhinestones
1 Remove the white protective backing sheet.
2 Place and position transfer (adhesive side down) on garment.
(You can re-lift if you need to reposition the transfer.)
3 Cover transfer with TEFLON sheet, and press at 350 F degrees
for 10-12 seconds. Pressure: 40 PSI or "medium to firm pressure"
4 Let cool and remove clear transfer tape slowly. Watch to
make sure all stones have bonded with the garment. If stones have not bonded, repeat step 3.
5 Put the garment inside out and press for another 10 seconds for best results.
In general, the higher the temperature, the less pressing time
you need.It's better to use a slightly higher temperature and shorter
pressing time so that the material is suffering heat for less time.
Machine wash inside out and cool dry.
